Contact lenses require the wearer to obtain a prescription outlining the type to purchase even if they are not meant for correction of vision. During physical examination of the eyes, the optician checks for astigmatism, hyper myopia, myopia and general eye health. Your visual strength will also be tested before prescription of Sacramento contact lenses.
In the process of their insertion, the first step should always be washing of hands. They should be adequately dried after that. Then, with your dominant hand, hold the tip of the lens with your index finger and bring down the lower eyelid.
The pointer finger of the less dominant hand is used in elevating the anterior eyelid. The lens is then slid gently onto the sclera while you are looking up. The fingers are then removed and the eyelids let go. Centering of lens is facilitated by closing the eyes for a moment. The same procedure is used when inserting the second lens.
When taking them out, again you start with hand washing and drying them thereafter. While gazing upwards, the lower lid is pulled downwards using the dominant hand middle finger. The pointer finger is then used to slide out the lenses by squeezing it between the finger and the thumb. Given the delicate nature of the lens and the sensitivity of the eye, this should be carried out with a lot of caution.
The disposable ones are meant for a single use. This saves you the hassle of cleaning and storage of other types of contact lens. However, the processes are not that hard as long as the instructions provided by the professional are followed. There are solutions in the market designed for use in soaking, rinsing, cleaning, and conditioning, disinfecting and removing proteins from lens.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
In storage, they are soaked for at least four hours in the cleanser solution. The solution is never to be reused. It should be discarded immediately after use. After doing all this, you can go ahead and put on lens again. If you notice any remaining debris, just rinse them before inserting them into the eyes.
If they are not in use, they must be kept in specially made cases for safety purposes. They should never be soaked in a saline solution. This does not result to disinfection. The cases may remain closed for a period of thirty days if they are not in use. However, beyond this, they have to be cleaned and disinfected before insertion. The solutions used should be professionally prepared. Otherwise, using something else will not be effective in accomplishing the purpose. Also, the results will be compromised in case the solution is been reused. The case the lens are stored in should be changed on a monthly basis.
In the process of their insertion, the first step should always be washing of hands. They should be adequately dried after that. Then, with your dominant hand, hold the tip of the lens with your index finger and bring down the lower eyelid.
The pointer finger of the less dominant hand is used in elevating the anterior eyelid. The lens is then slid gently onto the sclera while you are looking up. The fingers are then removed and the eyelids let go. Centering of lens is facilitated by closing the eyes for a moment. The same procedure is used when inserting the second lens.
When taking them out, again you start with hand washing and drying them thereafter. While gazing upwards, the lower lid is pulled downwards using the dominant hand middle finger. The pointer finger is then used to slide out the lenses by squeezing it between the finger and the thumb. Given the delicate nature of the lens and the sensitivity of the eye, this should be carried out with a lot of caution.
The disposable ones are meant for a single use. This saves you the hassle of cleaning and storage of other types of contact lens. However, the processes are not that hard as long as the instructions provided by the professional are followed. There are solutions in the market designed for use in soaking, rinsing, cleaning, and conditioning, disinfecting and removing proteins from lens.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
In storage, they are soaked for at least four hours in the cleanser solution. The solution is never to be reused. It should be discarded immediately after use. After doing all this, you can go ahead and put on lens again. If you notice any remaining debris, just rinse them before inserting them into the eyes.
If they are not in use, they must be kept in specially made cases for safety purposes. They should never be soaked in a saline solution. This does not result to disinfection. The cases may remain closed for a period of thirty days if they are not in use. However, beyond this, they have to be cleaned and disinfected before insertion. The solutions used should be professionally prepared. Otherwise, using something else will not be effective in accomplishing the purpose. Also, the results will be compromised in case the solution is been reused. The case the lens are stored in should be changed on a monthly basis.
About the Author:
Our website offers Sacramento contact lenses at cheaper prices. To choose us as your selected supplier, review our main homepage right here on http://adairoptometry.com.
No comments:
Post a Comment